Introduction - Planmeca ProOne Installation Manual

1

INTRODUCTION

NOTE You will also need the Planmeca ProOne X-ray unit's Technical manual (publication
NOTE This manual also explains the Ethernet link configuration procedure. The Dimaxis/
NOTE Required software versions:
Installation Manual
Printed copies of this document are considered uncontrolled.
7535.13.Rev001 08.07.2018
This manual contains all the information required to install and calibrate the Planmeca
ProOne X-ray unit. Please read this manual carefully before installing the X-ray unit.
number 10016258) during installation. The instructions for adjusting the X-ray unit
are given in the Technical manual.
Romexis software packages have separate installation manuals. You will also need
the Dimaxis/Romexis software User's manual.
- Planmeca ProOne software version 1.0.0.r or later
and one of the following
- Planmeca Dimaxis software version 4.3.1.0.r or later
- Planmeca Romexis software version 1.6.0.0.r or later
INTRODUCTION
Planmeca ProOne 1