Table of Contents
Advertisement
1 Introduction
1.1 Associated documentation
User's manual
This manual describes how to take 2D panoramic exposures. The manual
applies to the following X-ray units:
•
Planmeca ProMax 2D S2
•
Planmeca ProMax 2D S3
•
Planmeca ProMax 3D s
•
Planmeca ProMax 3D Classic
NOTE
This manual is valid for Planmeca ProMax software version 3.9.5 or later.
This software version is compatible with Planmeca Romexis software
version 5.1.1.r or later. To check the software version of your X-ray unit,
select Settings > About > 4100 Component Information > ProMax SW
version.
The X-ray unit uses panoramic techniques to produce two-dimensional (2D)
X-ray images for the examination of dentomaxillofacial anatomy.
You need a PC with the Planmeca Romexis program in order to save, view
and modify the images.
Make sure that you are fully acquainted with the appropriate radiation
protection measures and these instructions before you use the X-ray unit.
Note that your X-ray unit may not feature all the options described in these
instructions. Refer to section "Licences (2300)" on page 95 for a list of
available licences.
These instructions include options that may not be available in all countries.
NOTE
The X-ray unit may be used by health care professionals only.
NOTE
You can register your X-ray unit online as described in section "Product
Registration (4300)" on page 98.
The X-ray unit is supplied with the following manuals:
•
User's Manual(s)
•
Installation Quick Guide
•
Installation Manual
•
Technical Manual
•
Planmeca Device Tool Manual
These manuals are intended to be used in conjunction with the
documentation for the Planmeca Romexis program. The Romexis package
contains the following manuals:
•
User's Manual
•
Technical Manual
The original language of the manuals is English.
1 Introduction
Planmeca ProMax
1
Hide quick links:
Advertisement
Table of Contents
