Installation - Vitek Transcendent Series Quick Start Manual

Installation

3. Route the cables and 3. Route the cables and
connect the power & video connect the power & video
4. Before adjusting the three-axis camera mount, preview the
cables, use the rubber plug cables, use the rubber plug
camera on a monitor, then adjust as necessary achieve the
to fill the gap of the mounting to fill the gap of the mounting
optimum viewing angle.
base. then secure the base. then secure the
mounting base to the ceiling mounting base to the ceiling
or wall with screws. or wall with screws.
4. Before adjusting the three-axis camera mount, preview the 4. Before adjusting the three-axis camera mount, preview the
camera on a monitor, then adjust as necessary achieve the camera on a monitor, then adjust as necessary achieve the
optimum viewing angle. optimum viewing angle.
Rotation 0°~355°
Pan 0°~345° Pan 0°~345°
5. Install the dome bubble on the camera with the included screws,
then carefully remove the protective film to complete the installa-
tion.
Rotation 0°~345° Rotation 0°~345°
5. Install the dome bubble on the camera with the included screws, 5. Install the dome bubble on the camera with the included screws,
then carefully remove the protective film to complete the installa- then carefully remove the protective film to complete the installa-
tion. tion.
Pan 0°~355°
4
Rubber Plug Rubber Plug
Tilt 0°~67°
Tilt 0°~77 ° Tilt 0°~77 °