Table of Contents
Advertisement
Connecting Alarm Input / Output
Installation
Before beginning installation, make sure that the wall or ceiling is strong
enough to withstand 3 times the weight of the camera. The mounting
steps are as follows:
First Install a MicroSD Card as
Demonstrated in Diagram at Right
1. Attach the drill template to the
place where you want to install
the camera, then drill 3 screw
holes and 1 cable hole (if you
want to route the cables through
the mounting base) according to
the drill template (see below).
2.35"
1.17"
.18"
5.15"
4.71"
4.08"
3
Lock Screw
1.
2.
Ground Wire
Connection
Advertisement
Table of Contents
