Vitek Transcendent Series Quick Start Manual page 7

2. Open the IE Browser and input the default address of IP-CAM and 2. Open the IE Browser and input the default address of IP-CAM and
2. Open the IE Browser and input the default address of IP-CAM and
confirm. The IE browser will download Active X control. confirm. The IE browser will download Active X control.
confirm. The IE browser will download Active X control.
3. After downloading Active X control, the login dialog box will pop up. 3. After downloading Active X control, the login dialog box will pop up.
3. After downloading Active X control, the login dialog box will pop up.
4. Input the default username and password and then enter to view. 4. Input the default username and password and then enter to view.
4. Input the default username and password and then enter to view.
WAN Configuration
WAN Configuration
WAN Configuration
Access the camera by the router or virtual server for example.
1. Make sure the camera is connected to the LAN; Then log into the
Access the camera by the router or virtual server for example.
camera via LAN and go to System Congfig→Network Config→Port
Access the camera by the router or virtual server for example.
1. Make sure the camera is connected to the LAN; Then log into the
menu to set up the port number.
1. Make sure the camera is connected to the LAN; Then log into the
camera via LAN and go to System Congfig→Network Config→Port
camera via LAN and go to System Congfig→Network Config→Port
menu to set up the port number.
2. Enter System Config→Network Config→IP Address menu to modify menu to set up the port number.
the IP address.
2. Enter System Config→Network Config→IP Address menu to modify
2. Enter System Config→Network Config→IP Address menu to modify
the IP address.
the IP address.
3. Go to the router's management interface through IE browser to
forward the IP address and port of IP-CAM in the "Virtual Server".
3. Go to the router's management interface through IE browser to
3. Go to the router's management interface through IE browser to
forward the IP address and port of IP-CAM in the "Virtual Server".
forward the IP address and port of IP-CAM in the "Virtual Server".
4. Open the web browser and input its WAN IP and HTTP port to
access the IP-CAM.
4. Open the web browser and input its WAN IP and HTTP port to
4. Open the web browser and input its WAN IP and HTTP port to
5. For additional setup, features and functions, please scan
access the IP-CAM.
access the IP-CAM.
the QR code on the front page of this quick guide and
download the complete manual.
7