Setup Eclipse Devkit Ide; Configure Remote Target Connection - Intel Galileo Tutorial Manual

3 Setup Eclipse DevKit IDE

3.1

Configure Remote Target Connection

1. After successful boot-up from Live USB, the development system will show the desktop.
2. Launch the DevKit IDE by double clicking the desktop 'Eclipse DevKit IDE' icon on the host PC.
3. Inserting the Galileo target IP address captured in the previous step.
a) Select menu Window->Open Perspective->Other->Remote System Explorer
Right click the 'galileo' connection and select Properties -> Host
b)
c) First time, it will ask for the root password, there is no password for root, hence simply press OK.
Intel® Galileo Development Kit for IoT - Tutorial Guide
Figure 16: Development System Desktop
Figure 17: Root Password Dialog
Revision 1.0 – 20-Feb-2014
(Page 16 of 32)