Booting Devkit Live Usb On Mac - Intel Galileo Tutorial Manual

For iot

Hide thumbs Also See for Galileo:

Table of Contents

2.3

Booting DevKit Live USB on Mac:

NOTE: Because Mac UEFI firmware does not implement the 'Legacy BIOS' extension. The

DevKit live image needs to be run in a virtualized environment.

1. Install 'VirtualBox' and 'Oracle VM VirtualBox Extension Pack' on your Mac OS X machine by

following the instructions on the Virtual Box website:

https://www.virtualbox.org/wiki/Downloads

2. Insert the USB key into a USB slot on your Mac

3. Open the Terminal application and switch to the root user using the 'su' command and enter

the root password.

4. Use the 'diskutil list' command to find out the device node of your USB key and note it down

(e.g '/dev/disk4' on this screenshot)

Intel® Galileo Development Kit for IoT - Tutorial Guide

Figure 3: Super user terminal on Mac

Figure 4: Device list on Mac

Revision 1.0 – 20-Feb-2014

(Page 9 of 32)

Table of Contents