Intel Galileo Tutorial Manual page 10

For iot

Hide thumbs Also See for Galileo:

Table of Contents

5. Use the 'diskutil unmountdisk' command along with the device node captured in the

previous step to unmount all partitions found on the USB key e.g.

6. Use the 'chmod' command along with the device node captured in the previous step to make

the USB key device accessible by a non-root user

7. Create a VirtualBox virtual disk file corresponding to the DevKit USB key using the VBoxManage

command as shown below. Please note you will need to change the path where you wish the

file to be stored and use the device node captured in step 10 above

VBoxManage internalcommands createrawvmdk -filename /Users/todorminchev/Desktop/devkit.vmdk -

rawdisk /dev/disk4

NOTE : Back up your virtual disk file (e.g. devkit.vmdk) to a safe location. You might need

to refer to it in the future in case that your virtual machine gets corrupted.

8. You are now ready to create your virtual machine. Use the 'diskutil unmountdisk' command to

unmount the USB key again (please see step 5 above).

Intel® Galileo Development Kit for IoT - Tutorial Guide

Figure 5: Unmount disk on Mac

Figure 6: Make disk accessible on Mac

Figure 7: Create Virtual disk on Mac

Revision 1.0 – 20-Feb-2014

(Page 10 of 32)

Table of Contents