Intel Galileo Tutorial Manual page 25

5. Expand the 'Root' tree and select where on the target you wish your executable to be saved
(e.g. /tmp/myICCproject) → Click the OK button
6. In the 'Remote Absolute File Path for C/C++ Application' field enter a file name for your
binary on the target (e.g myICCproject)
7. In the 'Commands to execute before application' use the chmod command to make your
application executable on the target e.g. chmod 755 /tmp/myICCproject
Intel® Galileo Development Kit for IoT - Tutorial Guide
Figure-27: Destination of binary on remote target
Figure-28: Command setup for binary on remote target
Revision 1.0 – 20-Feb-2014
(Page 25 of 32)