Replacing The Pens And Erasers; Removing And Transporting The Display - SMART Board 7000R Series Installation And Maintenance Manual

CHAPTER 4
MAINTAINING THE DISPLAY
new temperature. Failing to do so can cause humidity to build up in the space between the front
glass and the LCD.
If condensation appears under the screen after you turn on the display, select an active video
source and leave the display on for 48 hours. If the condensation doesn't dissipate, contact SMART
Support if the display is still under warranty.
If there is enough moisture between the layers to cause the moisture to drip and run, remove
power immediately and contact SMART Support if the display is still under warranty.

Replacing the pens and erasers

To prevent damage to the display's anti-glare coating, replace a pen if its nib or eraser pad
become worn. You can purchase replacement pens and erasers from the Store for SMART Parts
(see support.smarttech.com/parts-store).
IMPORTANT
Use only pens designed for SMART Board 7000R and 7000R Pro series interactive displays.
Pens for other SMART products, including SMART Board 7000 and 7000 Pro series interactive
displays, aren't compatible with SMART Board 7000R and 7000R Pro series interactive displays
(see smarttech.com/kb/171230).
NOTE
For pen and eraser part numbers, refer to the service parts diagrams.

Removing and transporting the display

If the display is wall mounted, you might need to remove it from its current location and transport it
to another location on occasion.
To remove the display safely, use two or more trained installers.
WARNING
Do not attempt to move the display by yourself. The display is very heavy.
l
Do not move the display by connecting a rope or wire to the handles on the back. The
l
display can fall and cause injury and product damage.
46 smarttech.com/kb/171538