Connecting Other Devices; Viewing The Ops Pc Module Input; Connecting External Displays - SMART Board 7000R Series Installation And Maintenance Manual

CHAPTER 3
CONNECTING COMPUTERS AND OTHER DEVICES
TIP
You can install the SMART software that is included with the display on the OPS PC module. For
more information about installing software, see Installing SMART software on page 24.

Viewing the OPS PC module input

To view the OPS PC module input
1. Do one of the following:
If iQ is enabled
Tap the Home button
screen, and then tap Input
OR
Press the Input button
control.
A screen appears, showing thumbnails of the inputs connected to the display, including the
OPS PC module.
TIP
If iQ is disabled and you want the OPS PC module's input to appear whenever you wake up
the display, tap the star in the upper-left corner of the OPS PC module's thumbnail.
2. Tap the OPS PC module input.

Connecting external displays

You can connect an external display to duplicate or extend the OPS PC module's desktop.
For more information, see Connecting an external display on page 34.

Connecting other devices

In addition to computers, you can connect the following devices to the display:
USB drives, peripherals, and other devices
l
External displays
l
External audio systems
l
Room control systems
l
32 smarttech.com/kb/171538
If iQ is disabled
below the Tap the Home button
screen.
.
OR
Press the Home button
on the remote
button
below the
or the Input
on the remote control.