Connecting An External Audio System - SMART Board 7000R Series Installation And Maintenance Manual

CHAPTER 3
CONNECTING COMPUTERS AND OTHER DEVICES
TIP
If a SMART OPS PC module is installed in the accessory slot,
you can connect an external display to the HDMI 1.4 out
connector on the OPS PC module rather than the one on the
display. Doing so allows you to either duplicate or extend the
OPS PC module's desktop to the external display.

Connecting an external audio system

The display includes two 15 W speakers, which are designed to provide sound at the front of a
room. You might want to connect the SBA-100 projection audio system (see SBA-100 projection
audio system on page 8) or a third-party external audio system if you're providing sound in a larger
space.
You can connect an external
audio system to the display using
the stereo 3.5 mm out connector
(pictured). Alternatively, you can
connect an external audio
system directly to a room
computer.
35 smarttech.com/kb/171538