Applying An Automatic System Software Update Manually; Updating System Software Manually - SMART Board 7000R Series Installation And Maintenance Manual

CHAPTER 4
MAINTAINING THE DISPLAY
NOTE
You can configure your organization's network to allow or prevent automatic system software
and firmware updates (see

Applying an automatic system software update manually

If the display has downloaded but not yet applied the system software, you can start the update
process manually from Settings.
To apply an automatic system software update manually
1. From the Home screen, tap Settings
2. Scroll to Auto Update.
3. Under Check for Updates Now, tap Apply Update Now.
The display turns off and then turns back on. The display then applies the update.

Updating system software manually

You can download system software updates at
using a USB drive.
48 smarttech.com/kb/171538
Connecting to a network).
.
smarttech.com/downloads and update your display