5. Click Connect
6. Click Auto Tuning.
7. Click OK when the Auto tuning succeeded. message pops up.
Troubleshooting
POW ER LED is not lit on
1.
Check the connection of the power cord or the fuse. The fuse is located at the rear of the
instrument.
WARNING
AVERTISSEMENT
2.
Turn off and unplug the instrument.
Auto Tuning will start.
There is risk of receiving a fatal electric shock if the fuses are replaced with
the power cord connected.
Il y a un risque d'électrocution si les fusibles sont remplacés tandis que le
cordon d'alimentation est encore branché.
24
09931519A