EKKO EK20R Manual page 51

10.4.12 the use in the elevator and loading platform maneuvering: if
there is sufficient loading capacity, does not affect the operation of the vehicle,
and agreed by the user of the forklift, lift and loading platform that can be used
for forklift transport. Before entering the elevator or loading station, driver must
personally identify. The goods must be placed in front and occupy an appropriate
place, when the forklift enters the elevator, so as not to contact with the walls of
the elevator. When personnel and vehicles take the elevator together, personnel
must enter after the forklift safety entered, and personnel must leave before the
forklift.
10.4.1with access and working area: The forklift must be operated on the
specified channel, all the non-related personnel must leave the work area, and
cargo should be stacked in designated places.
10.4.14 Operations Management: traveling speed must be adapted to
local conditions. When through the corners, narrow passage, swing doors and
closed place, the vehicle must slow down. Drivers must be able to visually an
adequate braking distance between the vehicle and the vehicle in front, and he
must remain in control of his forklift. Sudden stop (unless urgent needs), rapid
U-turn, chased each other in the channel is not allowed in not smooth places. It is
forbidden to operate while the body is lean outside.
10.4.15Visibility: The driver must look in the direction of travel, to ensure
that the front situation is clearly visible. When the vehicle is backing up with the
carriage of goods blocked the line of sight, there is must be a second person walk
in front of the forklift to give appropriate guidance and warnings.
10.4.16 via the ramp: Only known ramp was allowed to go through. While
the ramp should be clean, non-slip, and the forklift technical specification
includes the ramp. The goods on the forks must face uphill. It is forbidden to turn
back, move diagonally or park on the ramp. The driver must slow down when
going through the ramp and prepare to brake at any time.
10.4.17 ground load: Remember to check the load pressure of the body
weight or wheels on the ground does not exceed the capacity of the ground,
when the vehicle is in operation.
10.4.18 Forklift Change: any possible changes or modifications for rated load,
stability or safe operation of the forklift, must obtain prior written approval from
origin manufacturers or its successor. After vehicle manufacturer check and
45