The battery that is normally used is charged once every 2 to 3 months. A
battery that has not been used for a long time should be balanced charged before
use.
10.1 General rule
10.1.1 Requirements for drivers: The operator must have the operating
qualification of the forklift (approved by the relevant department) before driving
the forklift
10.1.2 The operator must read the entire contents of the instruction manual
before using it, and drive the truck after fully understanding the operation
method.
10.1.3 The forklift truck must not carry passengers.
10.1.4 Operators should pay special attention to the operating environment
during work, including other people in the vicinity and other objects.
10.1.5 Do not modify, add or disassemble the moving parts without the
manufacturer's approval, so as not to affect its performance.
10.2 Transportation and storage
10.2.1 When shipping in containers or cars, please note:
○
1 The front and rear wheels are fixed with a wedge to prevent sliding
during transportation.
○
2 When using the lasso, pay attention not to put on the fragile structure
of the moving forklift;
○
3 When using the truck, keep the center of gravity of the truck in the
middle of the fork.
10.2.2 When the van is not working, it should be parked in a dry and
ventilated garage to prevent the sun and rain,and please note:
○
1 Turn off the electric lock, cut off the power and unplug the power plug;
10、Safety caution
42
Need help?
Do you have a question about the EK20R and is the answer not in the manual?