Download Print this page

EKKO EK20GT-LI Manual

Counterbalance lithium battery forklift truck

Advertisement

Quick Links

Counterbalance Lithium Battery Forklift Truck
EK20GT-LI
EK25GT-LI
EK30GT-LI
EK35GT-LI
EK40GT-LI

Advertisement

loading
Need help?

Need help?

Do you have a question about the EK20GT-LI and is the answer not in the manual?

Questions and answers

Summary of Contents for EKKO EK20GT-LI

  • Page 1 Counterbalance Lithium Battery Forklift Truck EK20GT-LI EK25GT-LI EK30GT-LI EK35GT-LI EK40GT-LI...
  • Page 2 3.EKKO neither assumes nor authorizes any other to assume for it any other liability in connection with the sale or service of the equipment. EKKO warrants our equipment under normal operating 4.No modifications, alterations or changes of this limited conditions to be of proper materials and first class warranty is permitted or authorized by EKKO.
  • Page 4 EKKO...
  • Page 15 FOR SUPERVISORS INSPECTION ■ALWAYS INSPECT BEFORE OPERATING REPLACE SAFETY PARTS REGULARLY ■ Recommended replace- Name of Safety parts ment interval(years) Cups and dust seals of master cylinder and wheel cylinders Power steering hose Steering actuator rubber boots Lift chain Load handling means hoses Certain critical parts must be replaced at regular intervalvs.
  • Page 18 HOW THE LIFT TRUCK WORKS? ■OUTSIDE THE TRIANGLE OF BALANCE, THE ■ RATED LOAD (LOAD WEIGHT AND LOAD TRUCK TIPS CENTER) For a lift truck to remain stable, the overall center of gravity must be The load center is the distance from the front face of the forks to the inside the triangle formed by the contact points of the left and right center of gravity of the load.
  • Page 24 TRAVELING Do not travel over a floor or ground surface covered with When going into areas where there are limits in height and water width, use the following cautions Do not travel over a floor or ground surface covered with water. Go Make sure there is enough height and width for the truck to pass.
  • Page 30 1-27...
  • Page 32 INSPECTION AND SERVICE Remove the battery receptacles before working on rotating Caution to be taken when adjusting tire inflation pressure parts (rim, compressor) Use due caution when working on rotating parts, not to get your When checking tire inflation pressure, position yourself in the path body entangled in them.
  • Page 34: Inspection And Service

    INSPECTION AND SERVICE 。 Obey regulations When disposing of waste oil, solvent, or discharged battery, obey the regulations and rules. Never hoist your lift truck by attaching ropes or wires to its overhead guard or counterweight; otherwise there is the possibility of the chassis getting damage or falling.
  • Page 36: Caution Plates

    CAUTION PLATES K.Warning decal for handling inflated tires J.Tire inflation pressure (example) N.Load chart: Do not overload! (For load charts, see page 5-4.) A.cAUTION The instructions on the caution plates carried in this manual may differ from those on the caution plates attached to the truck body.
  • Page 37 CAUTION PLATES A.Safe operation C.Warning for front guard F.Warning for mast connecting members WARNING YOU MUST FOLLOW THESE RULES TO AVOID SEVERE INJURY OR DEATH TO YOURSELF AND OTHERS. Ope⼼lelruck only i1 uamed and aulhori,ed by your employer. Know Opera11on & Ma,nlenance Manual and all work rules Salely check truck every day.

This manual is also suitable for:

Ek25gt-liEk30gt-liEk35gt-liEk40gt-li