Creation Of Safety Functions - Beckhoff AX8-1 Series Documentation

Operation
5.3.4

Creation of safety functions

The creation of a fail-safe user program is explained in the documentation for the EL6910 and the FB
description. The corresponding documents are listed under References [} 8].
Switching back to the default project
If the entire project (safe logic, parameters and mapping) is deleted on the AX8911 Twin-
SAFE drive option, the default project will be active again after restarting the AX8911.
Note
30 Version: 1.0.0 AX8911 - TwinSAFE Drive Option