Ametek Surgex UPS-17202-53R User Manual page 27

_________________________________________________________________
LCD Display in Bypass Mode
NOTE:
The LCD will display the actual input voltage in the input/output and
battery window.
1 . Press and hold the "SELECT" button for at least five seconds
to enter the UPS setting mode.
2. Press the "UP" or the "DOWN" button to scroll thru all of the pa-
rameters itemized as (01, 02, 03, 06, 07, 08, 09, 10 and 11).
3. When you see the item of the parameter that you want changed
press the "LEFT ARROW" button. In the "Setting Operation"
window on the LCD display the item will blink depending on the
selected parameter.
4. Press the "UP" or the "DOWN" button to scroll thru all of the avail-
able settings for that parameter.
5. When you see the setting that you want for that parameter press
the "LEFT ARROW" button to choose that setting.
© 2019 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / surgex.com
Rack Display
User Manual
22