Installation; Tower Installation - Ametek Surgex UPS-17202-53R User Manual

_________________________________________________________________

3. INSTALLATION

The UPS and external battery cabinet are designed to be rack mounted
in four post frames or to be floor standing in a tower configuration.

3.1 Tower Installation

Use all supplied mounting hardware on each UPS and extended battery
cabinet.
A. To install standalone, refer to the figure directly below :
•
Assemble two feet as one tower stand.
•
Align the two stands.
•
Put the UPS module in the stands.
B. To install a UPS module and one extended battery cabinet, refer to
the figure directly below :
•
Assemble two feet each with an extension as one tower stand.
•
Align the two stands.
•
Put the UPS module and external battery cabinet in the stands.
© 2019 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / surgex.com
Attention
User Manual
14