Lcd Display In Standby Mode; Turn On The Ups (Put The Ups In On-Line Mode); Lcd Display In On-Line Mode; Connect Devices To The Ups - Ametek Surgex UPS-17202-53R User Manual

_________________________________________________________________

5.1.2 LCD Display in Standby Mode

Rack Display

5.2 Turn on the UPS (Put the UPS in On-Line Mode)

When the input voltage is within the acceptable range press and hold the
"ON/Mute" button for at least two seconds. A few seconds later the UPS
will turn on and enter on-line mode. "ONLINE" will be displayed in the
UPS status window on the LCD display. The UPS will provide pure and
stable AC power to the output. The UPS will also charge the batteries.

5.2.1 LCD Display in On-Line Mode

Rack Display

5.3 Connect Devices to the UPS

After the UPS has been turned on, devices (load) can now be connect-
ed to the UPS. For socket-type outputs, there are two kinds of outputs:
programmable outlets and general-purpose outlets. Connect non-critical
© 2019 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / surgex.com
User Manual
Tower Display
Tower Display
27