AT&T UNIX Telephone Manager User Manual page 6

Telephone Manager 3.51 Important Information
6 When you place a data call from a remote
terminal connected to a UNIX PC host with a
single telep~one line, that line must be set
up as a data line. From the remote terminal,
you may use the phtoggle command to switch the
phone line from VOICE to DATA mode (Item 2
f
"New Features", Page 2 of this section). You
may also press [LINE SELECT] on the host
UNI~
PC to switch the line into DATA mode.
TECHNICAL TIPS:
1 Page 2-7. Ensure that all telephone lines
connected to your UNIX PC are idle before you
reconfigure telephone lines with the Telephone
Setup form.
2 Page 4-33. When you use the hyphen ( - ) as a
special dialing character to suppress call
history for a telephone call, only the name
and telephone number of the person dialed are
suppressed. Call history information in the
other fields still appear in the History List.
3 Page 4-59. You cannot place a data call using
the magic wand or dial pad. These features
can only be used to place voice calls.
4 Page 4-62. Allow the UNIX PC ample time for
processing if you are placing a data call from
the Call Screen or Directory using the autodial
feature to an external modem.
5