Getting Ready; Installing Telephone Manager - AT&T UNIX Telephone Manager User Manual

2 Setting
up
Telephone Manager
This section shows you how to install the Telephone
Manager software.
Once you install the software, you can connect your
telephone to your computer and connect your telephone
lines. This section briefly describes how to set up
and connect telephone lines.
Refer to the AT&T UNIX PC Installation Guide for
complete information about connecting telephone lines.
See the AT&T UNIX PC Owner's Manual for more
information about setting up the lines.
Getting Ready
Before you install your Telephone Manager software,
please do the following:
o Look for Telephone in your Office. If it is
listed, Telephone Manager software is already
installed. If it is not listed, refer to
"Installing Telephone Manager Software"
below.
Installjng Telephone Manager Software
You install Telephone Manager software by using the
Administration menu in the Office of any user.
To install Telephone Manager:
1 Select I Administration I from the Office and
press <Enter>.
2 Select ISoftware Setup I from the
Administration menu and press <Enter>.
2-1