Placing Calls - AT&T UNIX Telephone Manager User Manual

Placing Calls
If line 1 and line 2 are set up as voice lines, press
the LINE SELECT screen key to select which line to use
for an outgOing voice call.
In this example, both lines are set up for voice calls:
LwIlN • • ItJO
VOICE 2: IDLE Fri May 30, 12:15 pm
Line 1 is highlighted, indicating that i t is currently
selected, or ready for use. Notice that both lines
indicate IDLE, meaning there is no telephone activity.
If line 1 is set up for voice calls and line 2 is set
up for data calls, you can· press the LINE SELECT screen
key to change line 2 to a voice line to make outgoing
voice calls.
In this example, line 1 is set up for voice calls and
line 2 is set up for data calls. Notice that line 1 is
selected:
lijIIlN • •
ml.
DATA 2
Fri Hay 30, 12:17
Pili
Press LINE SELECT to change line 2 to a voice line and
select it for an outgoing voice call. Now the status
line looks like this:
VOICE 1: IDLE
QuIlN .. WmO
Fri May 30, 12:17
pm
Line 2 is selected to make or receive voice calls, but
it cannot make or receive data calls. Press LINE
SELECT again to change line 2 back to a data line and
select line 1.
4-54