Identifying The Telephone Manager Hardware - AT&T UNIX Telephone Manager User Manual

Setting
up
Telephone Manager
Note
If you plan to use your Telephone
Manager for data communications, you
must install the Asynchronous Terminal
Emulation (ATE) software or some other
communications package software. If you
plan to install ATE, refer to the
~
UNIX PC Terminal Emulation User's Guide
for installation instructions.
Identifying the Telephone Manager Hardware
Look at the back panel of your computer to see if your
UNIX PC telephone hardware is enabled:
If the back panel of your UNIX PC looks like the one
shown below, with three connectors labeled Phone, Line
1, and Line 2, your telephone hardware is enabled: you
can use the Telephone Manager communications features.
~-~ ~-~
.-----===
~-~~-~
~~-.,~~~
~~-.,~~~
~~~~-~
~~~~-~
~~-., ~_~
'-==-==::..1
Printer
~-~~-~
~-~~-~
~-~~-~
~-,.--.,~~~
~~-.,~~~
~~~~~~
~-~~~~
2-3