AT&T UNIX Telephone Manager User Manual page 123

Placing Calls
When connection is made, the screen is cleared. If
nothing appears on the screen, press the Return key
once or twice. If you have not set up an auto login
sequence, you see the other computer's login prompt.
When you log into another UNIX PC, you need to tell the
other computer your terminal type:
1 Respond to the Please login: prompt by typing
the user name, and password if required.
2 Respond to the message Please type the
terminal name followed by a RETURN by typing
the name of the Terminal Type you selected in
the Terminal Setup form for the data profile.
Type:
vt100
if you selected VT100, or
b513
if you selected 513BCT, or
if you selected UNIXPC
XXXXX
(Whatever your remote terminal type is)
if you selected REMOTE.
3 Press <Return>.
Refer to the AT&T UNIX PC Terminal EIDlllation User's
~
for instructions on using your computer in
emulation mode. Refer to the AT&T UNIX PC Remote
Access User's Guide for instructions for placing remote
data calls.
4-63