To Set Or Return The Ils Localizer Parameters To A Default State - Keysight Technologies X Series User Manual

Using Avionics VOR/ILS Softkeys for N5171B/72B and N5181B/82B with Option 302
Using ILS Localizer Softkeys

To set or return the ILS Localizer parameters to a default state

1. Press Aux Fctn > Avionics > ILS Localizer
2. Press More 1 of 2
3. Press Recall Default Settings
These softkeys return the ILS Localizer parameters
to a set of default state conditions.
372 Keysight EXG and MXG X-Series Signal Generators User's Guide
ILS Localizer Menu
ILS LOC Mode
Carrier Freq Index
Left/Right menu
DDM/SDM menu
a
COM/ID menu
a.
For information on the COM/ID menu,
"Using COM/ID Softkeys" on page 354
refer to
Parameters
1
Left Frequency
Right Frequency
Left/Right Phase
Fly Left/Right
DDM
DDM uA
DDM%
SDM
Default State
OFF
108.1 MHz
90 Hz
150 Hz
0.00 deg
Left
0.0000
0.0 uA
0.00%
40.0%
.