How to Upgrade Firmware
For information on new firmware releases, go to http://www.keysight.com/find/upgradeassistant.
How to Set Remote Operation Preferences
For details on operating the signal generator remotely, refer to the Programming Guide.
GPIB Address and Remote Language
Keysight EXG and MXG X-Series Signal Generators User's Guide
NOTES
USB is also available. It is not shown in the menu because it requires no configuration.
For details on using the instrument remotely, see the Programming Guide.
page 44
page 44
Select the desired language.
This setting is not persistent and is cleared by performing an
instrument Preset. In most cases, it is best to use Utility > Power
On/Preset > Language for a permanent language change. See
page 45.
Select On to place a copy of every subsequent SCPI command
executed in the log.
Select Off to stop logging. Selecting Off does not clear the log.
Press the Clear SCPI Log softkey to clear the log.
Select On to view the associated SCPI command for a key press.
Setting Preferences & Enabling Options for All Models
For details on each key, use key help as described on
How to Upgrade Firmware
page 56
.
43