Rear Panel Overview (N5173B & N5183B); Ac Power Receptacle - Keysight Technologies X Series User Manual

Models, Options, and Front/Rear Panels for All Models
Rear Panel Overview (N5173B & N5183B)
Rear Panel Overview (N5173B & N5183B)
Option 1EM only
3. LF OUT
page 18
See
2. EXT 1 & EXT 2

1. AC Power Receptacle

The AC power cord receptacle accepts a three–pronged AC power cord that is supplied
with the signal generator. For details on line setting requirements and the power cord,
see the Getting Started Guide.
To avoid the loss of data, GPIB settings, or current user instrument states
that have not been permanently saved to non-volatile memory, the signal
generator should always be powered down either via the instrument's
front panel power button or the appropriate SCPI command. Signal
generators installed in rack systems and powered down with the system
rack power switch rather than the instrument's front panel switch display
an Error -310 due to the instrument not being powered down correctly.
32
14. ALC INPUT
15. Z AXIS OUTPUT
6. TRIG 1 & 2
7. REF IN
5. PULSE
4. SWEEP OUT
Keysight EXG and MXG X-Series Signal Generators User's Guide
9. GPIB
8. 10 MHz OUT
11. Device USB
1. AC Power Receptacle
10. LAN
13. SD Card
12. Host USB