Keysight Technologies X Series User Manual page 161

Figure 6-6 Display Pulse Train Menu Softkeys
Pulse > Pulse Source > More > Pulse Train > Edit Pulse Train > Display Pulse Train
These are the division markers currently
This value can be
set at 10.00 us/div for the currently
adjusted with the
displayed view. Use the zoom softkeys
Time Offset softkey.
to change the time/div value.
This is the initial
pulse cycle (row 1)
note that the On
Time portion of this
pulse is not showing
due to the
2 us offset.
Keysight EXG and MXG X-Series Signal Generators User's Guide
Using Pulse Modulation for All Models with Options UNU, UNW, 320
2nd and 3rd 5th, 6th, and 7th
pulse cycles pulse cycles
(elements) or (elements) or rows
rows 2 and 3.
4th pulse cycle
(element) or row 4.
Pulse Train (Option 320 – Requires: Option UNW)
This softkey shifts the time
offset from the left hand side
of the display to the one
specified. Increments and
decrements are 1/20th of
the visible pulse train.
Use these softkeys to optimize
the view of the different
characteristics of the pulse
train.
Final pulse cycle
(element) in the
displayed pulse
train above. 8th
pulse cycle or row.
For details on each key, use key help as described on
page 56
.
143