Choosing The Logic Type And Port Configuration - Keysight Technologies X Series User Manual

Using the N5102A Digital Signal Interface Module for N5172B/82B with Option 003/004 and
Press N5102A Interface to access the user interface
N5102A Digital Signal Interface Module. Notice the graphic in the signal generator display,
showing a setup where the N5102A module is generating its own internal clock signal. This graphic
changes to reflect the current clock source selection.
Figure 17-10 N5102A Interface Menu

Choosing the Logic Type and Port Configuration

Figure 17-11 Logic and Port Configuration Softkey Menus
1. Refer to Figure 17-11. Press the Logic Type softkey.
Keysight EXG and MXG X-Series Signal Generators User's Guide
(Figure
Internal clock going to the DUT
Line is grayed out until the N5102A interface module is turned on
Operating the N5102A Module in Output Mode
17-10) that is used to configure the
653/655/656/657
435