Example: Using A Table Editor - Keysight Technologies X Series User Manual

Front Panel Operation for All Models
Entering/Editing Numbers and Text with Number and Arrow Keys

Example: Using a Table Editor

Table editors simplify configuration tasks. The following procedure describes basic table editor
functionality using the List Mode Values table editor.
1. Preset the signal generator: Press Preset.
2. Open the table editor: Press Sweep > More > Configure List Sweep.
The signal generator displays the editor shown in the following figure.
Active Function Area
Displays the active item as you edit it.
Table Editor Name
Current / Total Number of Pages
3. Highlight the desired item: use the arrow keys or the knob to move the cursor.
4. (Optional) Display the selected item in the active function area: Press Select.
5. Modify the value:
— If the value is displayed in the active function area, use the knob, arrow keys,
or numeric keypad to modify the value.
— If the value is not displayed in the active function area, use the numeric keypad to enter the
desired value (which then appears in the active function area).
6. Terminate the entry:
— If available, press the desired units.
— If units are not displayed, press either Enter (if available) or Select.
The modified item is displayed in the table.
58
Cursor
Highlighting indicates the selected item. To make this the active (editable)
item, either press Select, or simply enter the desired value.
(vector models only)
Table Items Table Editor Softkeys
Table items are also Used to load, navigate, modify, and
store table item values. For details
called data fields.
on each key, use the key help:
Press the Help key and then the
desired key.
Keysight EXG and MXG X-Series Signal Generators User's Guide
Indicates that
another menu
is available; to
display the
second menu,
press More.