Festo CPX-FB6 Electronic Manual page 67

2. Commissioning
Insert Device Description
Fig. 2/13: Dialogue window Insert Device Description"
Festo P.BE−CPX−FB6−EN en 0402b
In the following dialogue window you can describe the slave
and enter specific information, e.g. station name and picture
of the slave.
8. Profile Number:
The CPX terminal corresponds to the Interbus I/O profile
12 . Enter this value in the field Profile Number".
H
9. Interface Type:
Interface type Universal" is preset. This setting can be
accepted. Alternatively, with the button Interface Type",
you can open a dialogue window in which you can set the
type Remote bus".
2−29