Crankcase - Suzuki DR-Z70 Service Manual

3-49 ENGINE
• When installing the release arm 4 align the tongue A of
release arm plate with the groove B .
• Install the spacer 5 and lock-nut 6 and tighten the lock-nut
6 .

CRANKCASE

BEARING INSPECTION
• Rotate the inner race by finger to inspect for abnormal play,
noise and smooth rotation while the bearings are in the crank-
case.
• Replace the bearing in the following procedure if there is any-
thing unusual.
RIGHT CRANKCASE BEARING REMOVAL
• Remove the bearing retainer 1 .
• Remove the bearings with the special tools.
09921-20240: Bearing remover set
Bearing 2 : 22 Attachment
Bearing 3 : 17 Attachment
Bearing 4 : 12 Attachment
LEFT CRANKCASE BEARING REMOVAL
• Remove the bearings with the special tools.
09921-20240: Bearing remover set
Bearing 1 : 62 Attachment
Bearing 2 : 17 Attachment
Bearing 3 : 40 Attachment