Transmission - Suzuki DR-Z70 Service Manual

3-39 ENGINE

TRANSMISSION

DISASSEMBLY
• Disassemble the transmission gears as shown in the illustration.
1 1st driven gear
2 3rd driven gear
3 Driveshaft
REASSEMBLY
Assemble the countershaft and driveshaft in the reverse order of disassembly. Pay attention to the following
points:
NOTE:
Before installing the gears, apply engine oil to the bearing and inner surface of the each gear.
* Never reuse a snap ring. After a snap ring has been removed from a shaft, it should be dis-
carded and a new snap ring must be installed.
* When installing a new snap ring, do not expand the end gap larger than required to slip the
snap ring over the shaft.
* After installing a snap ring, make sure that it is completely seated in its groove and securely
fitted.
4 Countershaft
5 3rd drive gear
6 Sliding dog
7 2nd drive gear