Removing The Air Inlet Cover - Avaya Virtual Services Platform 9010 Manual

AC power supply installation for the VSP 9010 AC chassis
The individual on and off power switches and inlet connectors at the back of the Virtual Services
Platform 9010 AC chassis are numbered decreasing from left to right, with 4, 3, 2, and 1 on the first
row, and then 8, 7, 6, and 5 on the second row.
Related Links

Removing the air inlet cover

Installing the power supply
Removing the power supply
Removing the air inlet cover
Before you can install or remove a power supply or cooling module, you must remove the air inlet
cover from the chassis.
Procedure
1. Grasp the cover on each side.
2. Lift the cover up and away from the chassis.
Installing AC Power Supplies in Avaya VSP 9000
14
on page 14
on page 15
on page 18
Comments? infodev@avaya.com
December 2014