Removing The Server From The Rack - Avaya S8800 Manual

Replace the Avaya S8800 Server and its components
#
3 Remove the server
from the rack.
4 Remove the reusable
components from the
failed server.
5 Install the reusable
components in the
new server.
6 Install the new server
in the rack.
7 Reconnect the
external cables and
power cords.
8 Turn on the server.

Removing the server from the rack

Procedure
1. Turn off the server and all attached devices.
2. Label and disconnect all power cords and external cables.
3. Push the locking levers (1) forward. See the following figure.
14 Maintaining the Avaya S8800 Server for Avaya Aura
Task Description
See Removing the
server from the
rack on page 14.
See Reuse of
hardware components
in replacement
servers on page 12
See Reuse of
hardware components
in replacement
servers on page 12
See Installing the
server in the rack
page 15.
See Turning on the
server on page 16.
Comments? infodev@avaya.com
Notes
on
®
Communication Manager July 2012