Figure 1-24 Feet Brackets; Figure 1-25 T-20 Torx Screws - Keysight 8990B Installation Manual

5 Secure the rear of the 8990B to the support tray with the feet brackets as
Figure 1-24
6 Use two T-20 TORX screws to secure and then repeat for the other 8990B rear
Figure 1-25
Keysight 8990B Installation Guide
shown below. There is a notch on the upper back edge of each 8990B rear foot.
Place the bracket in this indentation and then line up the holes with the holes
in the support tray.
Feet brackets
foot.
T-20 TORX screws
Getting Started
55
1