Figure 1-26 8990B And Support Tray; Figure 1-27 Connect The Bnc Connector To The Bottom Trim Plate - Keysight 8990B Installation Manual

1 Getting Started
7 The 8990B and support tray should now look like the following figure except that you
Figure 1-26
8 Next, push the 8990B support tray into the rack so it is no longer extended. Then
Figure 1-27
56
may have cables connected to the rear panel BNCs if you chose to attach them.
8990B and support tray
connect the other end of each of the cables you routed under the 8990B to one
of the BNC connectors on the bottom trim plate piece as shown in
you do not want to install all five BNC connectors into the openings in the
bottom trim plate, then you can fill the hole(s) with the supplied rubber stoppers.
Connect the BNC connector to the bottom trim plate
Figure
Keysight 8990B Installation Guide
1-27. If