Figure 1-20 Support Tray; Figure 1-21 Raised Tabs In The Support Tray - Keysight 8990B Installation Manual

Installing the 8990B into the rack
1 Slide the support tray onto the rails, but do not slide completely into the rack.
Do not leave the support tray extended too much or else it may not support the
NOTE
8990B when you place it on top.
Figure 1-20
2 Place the 8990B on the support tray. There are raised tabs in the support tray. The
Figure 1-21
Keysight 8990B Installation Guide
Instead, leave it slightly extended so you can place the 8990B on top of it as
shown in Figure 1-20.
Support tray
front side of the 8990B rear feet should rest against these tabs as shown below.
Raised tabs in the support tray
Getting Started
The front of the 8990B
rear feet should rest
against these tabs
1
53