Figure 1-18 Proper Locations For The Sheet Metal Nut Locations - Keysight 8990B Installation Manual

2
– To ensure a level installation, the same eight rack unit locations are used on
NOTE
– The following diagram only shows seven rack units.
Figure 1-18
Keysight 8990B Installation Guide
Figure 1-18 indicates the proper locations for the sheet metal nut locations.
each vertical rack piece.
Rear of rack
Distance from the upper most nut
to the lower most nut is equal to
eight rack units (diagram only
shows seven rack units)
Proper locations for the sheet metal nut locations
Getting Started
Four nuts installed for the
track rail. Locations must
align front and rear.
To ensure the proper rail
nut installation aligns with
this nut on the front of rack
Front of rack
1
51