Rack Mounting The 8990B; Included Parts; Figure 1-15 Track Rails, Sheet Metal Nut, And Support Tray - Keysight 8990B Installation Manual

1 Getting Started

Rack Mounting the 8990B

This section explains how to rack mount the 8990B using the Option 1CM rack
mount kit.

Included parts

The rack mount kit includes the following parts (additional quantities of some of
these items are included for your convenience):
– Support tray
– Trim plate (consists of a bottom piece, top piece, and two side pieces)
– BNC connectors to be inserted into the bottom trim plate
– Black rubber stoppers to plug holes in the bottom trim plate if the hole is not
– Two track rails
– Two feet brackets
– Sheet metal nuts
– Three sets of screws (cream-colored pan head screws for attaching the trim
Figure 1-15
48
being used for a BNC connection
plate pieces, 10-32 pan head screws for attaching the side rails to the rack, and
metallic T-20 TORX screws for attaching the feet brackets to the support tray)
Track rails, sheet metal nut, and support tray
Track rails
Sheet metal
nut
Support
Tray
Keysight 8990B Installation Guide