Figure 1-5 Trigger Section - Keysight 8990B Installation Manual

1 Getting Started
Figure 1-5
This section is categorized as trigger controls.
32
Trigger section
Item Description
Press this key to set the trigger source to any of the channels or auxiliary.
The selected trigger source LED above this key will be illuminated.
Press this key to trigger on a rising or falling edge. The selected slope LED above this
key will be illuminated.
Press this key to set the trigger sweep mode to either automatic or triggered. The
selected sweep mode LED above this key will be illuminated.
Press this key to access the trigger menu
Turn this knob to configure the trigger level. Push this knob to set the trigger level to
50%.
Keysight 8990B Installation Guide