Check Character Verification - Newland NLS-HR42 User Manual

Check Character Verification

Check characters are optional for MSI-Plessey and can be added as the last one or two characters, which are calculated
values used to verify the integrity of the data.
If the Disable option is enabled, the scanner transmits MSI-Plessey barcodes as is.
@MSICHK0
Disable
@MSICHK1
** One Check Character, MOD10
@MSICHK2
Two Check Characters, MOD10/MOD10
If you select a check character algorithm and the Do Not Transmit Check Character option, MSI-Plessey
barcodes with a length that is less than the configured minimum length after having the check character(s)
excluded will not be decoded. (For example, when the One Check Character, MOD10 and Do Not
Transmit Check Character options are enabled and the minimum length is set to 4, MSI-Plessey
barcodes with a total length of 4 characters including the check character cannot be read.)
145
@MSICHK3
Two Check Characters, MOD10/MOD11
@MSITCK0
Do Not Transmit Check Character
@MSITCK1
** Transmit Check Character