Newland NLS-HR42 User Manual page 50

@CADLEF
Left of Decoding Area
Program the scanner to only read Barcode 1 in the figure above by setting the decoding area to
10% top, 45% bottom, 15% left and 30% right:
1. Scan the Top of Decoding Area
2. Scan the numeric barcode "0" from the "Digit Barcodes" section in Appendix.
3. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
4. Scan the Bottom of Decoding Area
5. Scan the numeric barcodes "4" and "5" from the "Digit Barcodes" section in Appendix.
6. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
7. Scan the Top of Decoding Area
8. Scan the numeric barcodes "1" and "0" from the "Digit Barcodes" section in Appendix.
9. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
10. Scan the Left of Decoding Area
Barcode 1
barcode.
barcode.
barcode.
barcode.
Right of Decoding Area
Barcode 2
@CADRIG
36