Set Length Range For Code 16K - Newland NLS-HR42 User Manual

Set Length Range for Code 16K

The scanner can be configured to only decode Code 16K barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
@16KMIN
Set the Minimum Length (Default: 1)
If minimum length is set to be greater than maximum length, the scanner only decodes Code 16K
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only Code 16K barcodes with that length are to be decoded.
Set the scanner to decode Code 16K barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2. Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
3. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
4. Scan the Set the Maximum Length barcode.
5. Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
6. Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
149
@16KMAX
Set the Maximum Length (Default: 80)