Set Length Range For Qr Code - Newland NLS-HR42 User Manual

Set Length Range for QR Code

The scanner can be configured to only decode QR Code barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
@QRCMIN
Set the Minimum Length (Default: 1)
Minimum length is not allowed to be greater than maximum length. If you only want to read QR Code
barcodes with a specific length, set both minimum and maximum lengths to be that desired length.
Set the scanner to decode QR Code barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
2.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
3.
4. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
5.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
6.
@QRCMAX
Set the Maximum Length (Default: 7089)
158