Parity Check; Data Bit - Newland NLS-HR42 User Manual

Parity Check

Set the parity type to match the host requirements.

Odd Parity: If the data contains an odd number of 1 bits, the parity bit value is set to 0.

Even Parity: If the data contains an even number of 1 bits, the parity bit value is set to 0.

None: Select this option when no parity bit is required.
@232PAR0
** None
@232PAR1
Even Parity

Data Bit

Set the number of data bits to match the host requirements.
@232DAT1
7 Data Bits
45
@232PAR2
Odd Parity
@232DAT0
** 8 Data Bits