Disabling Password Protection - FlowLine DataView LI55 Series Quick Start Manual

DataView™ LI55 Level Controller
Making Changes to a Password Protected Meter
If the meter is password protected, the meter will display the message
Locd (Locked) when the Menu button is pressed. Press the Enter button
while the message is being displayed and enter the correct password to
gain access to the menu. After exiting the programming mode, the
meter returns to its password protected condition.

Disabling Password Protection

To disable the password protection, access the Password menu and
enter the correct password twice. The meter is now unprotected until a
new password is entered.
1. Press the MENU button to enter the Main Menu. Locked (Locd) will
appear.
2. Press the ENTER button to enter a password. 000000 will appear.
a. Enter the correct password using the Right button to
move the highlighted digit to the right and the Up button to
increase the setting's value.
3. Press the ENTER button to enter the Password.
a. Unlocked (unLoc) will appear.
Quick Start
29 | P a g e