FlowLine DataView LI55 Series Quick Start Manual page 25

DataView™ LI55 Level Controller
a. Scroll through the Relays, usually 1-4, using the Up
button. Press the ENTER button to select a Relay.
b. The Relay Set Point (SEt #) will appear.
4. Press the ENTER button again to view the Relay Set Point (SEt #)
for the relay. The Relay Set Point sets the level where the relay will
energize by falling between the Empty and Full values. Values can
be changed by pressing the Right button to move the highlighted
digit to the right and the Up button to increase the setting's value.
a. Press the ENTER button to save this setting.
b. The Relay Reset Point (rSt #) will appear.
5. Press the ENTER button again to view the Reset Point (rSt #) for
the relay. The Reset Point sets level where the relay will de-
energize by falling between the Empty and Full values. Again,
values can be changed by pressing the Right button to move the
highlighted digit to the right and the Up button to increase the
setting's value.
a. Press the ENTER button to save the setting.
b. The next relay (rLy #) in sequence will appear
6. To set another relay, press ENTER to continue or press MENU
button to exit.
Quick Start
25 | P a g e